Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000/ z1r 28mm carbs

Post all your wanted ads here.

Moderators: paul doran, Taffus, KeithZ1R, chrisu

Post Reply
Message
Author
User avatar
Hobbo
International Rep
Posts: 2439
Joined: 18th Mar 2006
Location: Hull

Z1000/ z1r 28mm carbs

#1 PostAuthor: Hobbo » Thu Aug 25, 2022 8:25 am

Guys

As title says after a tidy set of 28mm carbs to fit z1000 a1/a2
Not bothered about need bit of cleaning but not knackered ones
Plus can't afford mint restored ones

Phil
Never Dull in Hull Watch no 31

International Rep
Top
tightwad
Regular Poster
Posts: 49
Joined: 13th May 2013
Location: chesterfield

Re: Z1000/ z1r 28mm carbs

#2 PostAuthor: tightwad » Sun Aug 28, 2022 7:02 pm

are these any good, they are 28mm carbs, not sure if z1r but i put new keyster kits in to suit z1r and choke plungers have been done by rob meggit. choke holding screw is missing. looking for £250
20220828_112020.jpg
20220826_165740.jpg
20220826_165321.jpg
20220826_165307.jpg
20220826_165206.jpg


ken
Top
User avatar
Hobbo
International Rep
Posts: 2439
Joined: 18th Mar 2006
Location: Hull

Re: Z1000/ z1r 28mm carbs

#3 PostAuthor: Hobbo » Mon Aug 29, 2022 10:35 am

Hi thanks for that I have just paid for some this morning but will keep details

Thanks
Never Dull in Hull Watch no 31

International Rep
Top
User avatar
Hobbo
International Rep
Posts: 2439
Joined: 18th Mar 2006
Location: Hull

Re: Z1000/ z1r 28mm carbs

#4 PostAuthor: Hobbo » Mon Aug 29, 2022 10:35 am

Guys

Prob sorted now thanks

Phil
Never Dull in Hull Watch no 31

International Rep
Top
tightwad
Regular Poster
Posts: 49
Joined: 13th May 2013
Location: chesterfield

Re: Z1000/ z1r 28mm carbs

#5 PostAuthor: tightwad » Mon Aug 29, 2022 6:09 pm

no worries, i did measure them to make sure they were 28mm and they are 29mm :?:
20220826_165524.jpg


ken
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 3815
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

Re: Z1000/ z1r 28mm carbs

#6 PostAuthor: zed1015 » Mon Aug 29, 2022 6:29 pm

tightwad wrote:no worries, i did measure them to make sure they were 28mm and they are 29mm :?:

ken


No! They are 28mm.
They are sized by the width at the narrowest point in the venturi which is usually the bore closest to the needle jet.
The venturi tapers out toward the outlet so vm26 measure around 27mm and vm28 around 29mm at that point.
Top
tightwad
Regular Poster
Posts: 49
Joined: 13th May 2013
Location: chesterfield

Re: Z1000/ z1r 28mm carbs

#7 PostAuthor: tightwad » Tue Aug 30, 2022 6:50 pm

thanks for the explanation, never thought of them being tapered :up

ken
Top
User avatar
walshyco
100Club
100Club
Posts: 387
Joined: 4th Oct 2009
Location: Exmouth

Re: Z1000/ z1r 28mm carbs

#8 PostAuthor: walshyco » Thu Sep 01, 2022 12:45 pm

Interested, PM sent.
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 81 guests