Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Lockup Clutch set up

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

Lockup Clutch set up

#1 PostAuthor: Pigford » Fri Aug 03, 2007 12:54 pm

Just got hold of an MRE lock up clutch kit from USA (eBay) :wink:

Anyone got any tips about fitment :?:

Seems quite straight forward, already got proper casing cover so won't foul :roll:

Any advice welcome before i try and start to set it up :P
And on the 7th day... Zeds were created!
Top
User avatar
Jeff Saunders
100Club
100Club
Posts: 266
Joined: 18th Nov 2004
Location: Upstate NY, USA
Contact:
Contact Jeff Saunders

#2 PostAuthor: Jeff Saunders » Fri Aug 03, 2007 10:45 pm

When you install it you'll see the levers put pressure on the pressure plate - the issue is you need to modify the pressure plate - drill and install little teflon buttons to stop the levers from eventually cracking the pressure plate.
73 Z1 (turbocharged), a 74 Z1A, and some h***a's and Suzuki's...
www.z1enterprises.com jeff@z1enterprises.com
Top
User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

#3 PostAuthor: Pigford » Sat Aug 04, 2007 10:21 am

Thanks for that tip Jeff, sounds like good advice.
I'm gonna get a needle bearing, mushroom lifter from Steve (Debben) and would be happy for any DETAILED information/advice on Jeffs comments above for strengthening the end pressure plate. :|
Where can i get hold of teflon buttons or similar (nylon maybe) :?:
And on the 7th day... Zeds were created!
Top
User avatar
uk kev
ZedHead
ZedHead
Posts: 1184
Joined: 13th Aug 2006
Location: Berkshire

#4 PostAuthor: uk kev » Sat Aug 04, 2007 10:32 am

do you need to split the cases to do the work you are doing? as I fancy one of the clutch lifters as well, I was going to call in Debbens next week to buy one. ask Jeff for a price for the buttons.

And take lots of pictures of the work so we can all learn from the Pigford master class :wink:
Top
Padders
Hardcore
Hardcore
Posts: 3046
Joined: 15th Jan 2006
Location: Grimsby Lincolnshire

#5 PostAuthor: Padders » Sat Aug 04, 2007 10:43 am

These guys will sell you a modified pressure plate and are happy to give out any advise. I nearly bought a complete kit from them for the Harris.

E bay ref 4625845716

padders
Top
Rich
Hardcore
Hardcore
Posts: 1981
Joined: 4th Mar 2003

#6 PostAuthor: Rich » Sat Aug 04, 2007 11:03 am

Kev - no just remove the clutch casing and pressure plate.

Pigford - some fit steel buttons to spread the load.
Rich
 diplomacy is a form of art - I was never any good at art
Top
User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

#7 PostAuthor: Pigford » Sat Aug 04, 2007 1:16 pm

Cheers guys!
Rich, can I locate some 'ready-to-fit' steel buttons, or do i just get some rod cut :?:
Any idea on size (diameter rod & length of cut buttons) :?
And on the 7th day... Zeds were created!
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 40 guests