Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Brake Rotors

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
User avatar
nicomkii
100Club
100Club
Posts: 424
Joined: 15th Nov 2014
Location: Perth Western Australia

Brake Rotors

#1 PostAuthor: nicomkii » Sun Nov 01, 2015 11:48 am

What are people doing with getting their brake discs up to scratch. Mine probably have one more year then they will be too thin to be skimmed. There is a mob down here who refurbish using your original centres and original hole spacings but that comes at a price of $300.00 per disc so around $900 for all 3 (420 pounds )
What have others used and pricings, quality etc ?
Top
ZedHead
Hardcore
Hardcore
Posts: 2727
Joined: 9th May 2009
Location: Darlington
Contact:
Contact ZedHead

#2 PostAuthor: ZedHead » Sun Nov 01, 2015 2:43 pm

Don,t try to skim the, they will chatter. Get a machine shop to surface grind them.
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1357
Joined: 18th Jul 2008
Location: Derbyshire/London

#3 PostAuthor: wilsonsjw11 » Sun Nov 01, 2015 3:12 pm

And if you get them surface ground make sure its to a fine finish as they will
still chatter.
Regards
Steve
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3257
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#4 PostAuthor: PAULJAC47 » Sun Nov 01, 2015 3:55 pm

And probably squeal...some disc rotors are still available,z power do em i think..
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
wilsonsjw11
Hardcore
Hardcore
Posts: 1357
Joined: 18th Jul 2008
Location: Derbyshire/London

#5 PostAuthor: wilsonsjw11 » Sun Nov 01, 2015 4:55 pm

I tried 'refreshing' 3 brake discs for my Z1s and they either chattered or squealed. I was lucky enough to have collected 3 NOS units over the years and these have all now been fitted with no further problems.
I believe that the pattern items are as good as OEM ones too.
Regards
Steve
Top
User avatar
000zeds
ZedHead
ZedHead
Posts: 1207
Joined: 30th Dec 2005
Location: Kent

#6 PostAuthor: 000zeds » Sun Nov 01, 2015 5:01 pm

Z-Power have them


https://www.z-power.co.uk/merchantmanag ... ts_id=1298
Zeds-R-Us
Top
User avatar
nicomkii
100Club
100Club
Posts: 424
Joined: 15th Nov 2014
Location: Perth Western Australia

#7 PostAuthor: nicomkii » Sun Nov 01, 2015 10:27 pm



Thats them, 6 hole centres as long as the hub diameter is the same. They don't mention A3 MkII but have emailed and also find out about shipping down under. Self drill I am guessing ?
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4690
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#8 PostAuthor: z1bman » Mon Nov 02, 2015 12:09 am

z1 through to z1b have 6 hole mounting . z900 a4 onwards only have 4 mounting holes
Top
User avatar
nicomkii
100Club
100Club
Posts: 424
Joined: 15th Nov 2014
Location: Perth Western Australia

#9 PostAuthor: nicomkii » Mon Nov 02, 2015 2:18 am

z1bman wrote:z1 through to z1b have 6 hole mounting . z900 a4 onwards only have 4 mounting holes


Yep and ZPower don't have the 4 hole mounts so looks like refurbing the current ones.
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4690
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#10 PostAuthor: z1bman » Mon Nov 02, 2015 7:46 am

http://www.z1enterprises.com/ItemDetail ... LAMD4076LS
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: Bing [Bot], celger7 and 50 guests