Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Tightening z1000 rotor bolt

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Message
Author
Gavin
Custard Cream
Custard Cream
Posts: 871
Joined: 11th Jun 2011
Location: Scunthorpe

Tightening z1000 rotor bolt

#1 PostAuthor: Gavin » Sat Feb 27, 2021 1:21 am

Hi guys
How do I go about tightening the rota bolt without having the special tool to hold the rotor and not having the equipment to make one.

Gavin
Z1000 MK2
Z1300 DFI

User avatar
zed1015
Hardcore
Hardcore
Posts: 3910
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

Re: Tightening z1000 rotor bolt

#2 PostAuthor: zed1015 » Sat Feb 27, 2021 1:40 am

Stick the bike in gear and stand on the back brake or use a strap wrench.

Mr Bump
100Club
100Club
Posts: 382
Joined: 30th Dec 2015

Re: Tightening z1000 rotor bolt

#3 PostAuthor: Mr Bump » Sat Feb 27, 2021 8:46 am

Like the man says, a good strong strap wrench will hold it.

Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'

Lemmy

Gavin
Custard Cream
Custard Cream
Posts: 871
Joined: 11th Jun 2011
Location: Scunthorpe

Re: Tightening z1000 rotor bolt

#4 PostAuthor: Gavin » Sun Feb 28, 2021 2:48 pm

Strap wrench turned up today, £12 off Amazon,
The job it was to be used for took less than 15 seconds but worth every penny
Thanks for your advice

Gavin
Z1000 MK2
Z1300 DFI

LTD Project
100Club
100Club
Posts: 255
Joined: 31st Aug 2008
Location: York, North Yorkshire

Re: Tightening z1000 rotor bolt

#5 PostAuthor: LTD Project » Wed May 31, 2023 12:28 pm

Well, a strap wrench helped me too on this job, but try as I might, I dont reckon I am getting more than about 60 ft/lbs on the bolt....

Will that do? Not to spec I know :glare

If not, anyone got a rotor holder tool that I can borrow, near York??
Help and motivation always required......
KZ1000 B4 under light restoration.

LTD Project
100Club
100Club
Posts: 255
Joined: 31st Aug 2008
Location: York, North Yorkshire

Re: Tightening z1000 rotor bolt

#6 PostAuthor: LTD Project » Thu Jun 01, 2023 6:09 am

Bump… Any sage words or tool help would be great, want to get her MOT’d and on the road.
Help and motivation always required......
KZ1000 B4 under light restoration.

User avatar
Gus
Hardcore
Hardcore
Posts: 1493
Joined: 17th Mar 2007
Location: Gloucestershire

Re: Tightening z1000 rotor bolt

#7 PostAuthor: Gus » Thu Jun 01, 2023 7:37 am

Would somebody confirm this method before Gavin goes ahead?


If it has Alloy wheels, put a STRONG piece of wood (with some cloth wrapped around it for protection) through the rear wheel under the swing arm both sides.

Put it in gear and tighten the rotor bolt so that the wheel spoke is hard up against the wood which is then held up hard against the underside of the swing arm.

Tighten the rotor bolt.

Gus
"Set the GRINDER on it"

LTD Project
100Club
100Club
Posts: 255
Joined: 31st Aug 2008
Location: York, North Yorkshire

Re: Tightening z1000 rotor bolt

#8 PostAuthor: LTD Project » Thu Jun 01, 2023 11:00 am

Thanks Gus

The wood between alloy wheel and swingarm did the trick....95 ft/lbs achieved. Phew, much appreciated!

Now back on with the cover.
Help and motivation always required......
KZ1000 B4 under light restoration.

User avatar
Gus
Hardcore
Hardcore
Posts: 1493
Joined: 17th Mar 2007
Location: Gloucestershire

Re: Tightening z1000 rotor bolt

#9 PostAuthor: Gus » Thu Jun 01, 2023 11:06 am

:lol: :lol:

Gus
"Set the GRINDER on it"


Return to “Bike Help”

Who is online

Users browsing this forum: Bing [Bot], clacker, phil1r and 73 guests