Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
z1000A2 Chain and sprockets
Moderators: chrisu, paul doran, Taffus, KeithZ1R
z1000A2 Chain and sprockets
Hi
Whats a good make and price , for a chain and sprockets change , quite like the Gold looking ones , and what pitch 530 etc . Thanks
Whats a good make and price , for a chain and sprockets change , quite like the Gold looking ones , and what pitch 530 etc . Thanks
Re: z1000A2 Chain and sprockets
EK, DID, RK, etc all as good as each other nowadays.
All down to personal preference and 630 is stock pitch.
530 is slightly lighter and just as strong and cheaper due to it being the more popular fitment on most modern bikes.
530 conversion kits are available from Cybike https://www.cybike.co.uk/Shop/Products/ ... r-z1-z1000 etc but you can put you own together using sprockets from more modern bikes.
Front sprocket Z13 spline is common on most kawasakis and Suzukis and the six bolt rear is still used on nearly all Kawasaki ZXR's etc.
All down to personal preference and 630 is stock pitch.
530 is slightly lighter and just as strong and cheaper due to it being the more popular fitment on most modern bikes.
530 conversion kits are available from Cybike https://www.cybike.co.uk/Shop/Products/ ... r-z1-z1000 etc but you can put you own together using sprockets from more modern bikes.
Front sprocket Z13 spline is common on most kawasakis and Suzukis and the six bolt rear is still used on nearly all Kawasaki ZXR's etc.
Re: z1000A2 Chain and sprockets
zed1015 wrote:EK, DID, RK, etc all as good as each other nowadays.
All down to personal preference and 630 is stock pitch.
530 is slightly lighter and just as strong and cheaper due to it being the more popular fitment on most modern bikes.
530 conversion kits are available from Cybike https://www.cybike.co.uk/Shop/Products/ ... r-z1-z1000 etc but you can put you own together using sprockets from more modern bikes.
Front sprocket Z13 spline is common on most kawasakis and Suzukis and the six bolt rear is still used on nearly all Kawasaki ZXR's etc.
As he said :-) Modern X Ring chains last 30% longer on average then O ring chains. Z1000 530 pitch rear sprockets are not available as equivalents from other bikes but can be made.
My advice is free if you want call me 01609 773486. No obligation to buy.
Dave
Re: z1000A2 Chain and sprockets
Hi Thanks , and interested in conversion kit , but sizes 40 rear 18 front ?
Re: z1000A2 Chain and sprockets
snowyz9 wrote:Hi Thanks , and interested in conversion kit , but sizes 40 rear 18 front ?
Correct. Z1000 A2 uses 15T front, 33T rear and 92 links. Multiply by 1.2 to convert to 530.
Something like a JTF513-18 Front with an inner spacer and a JTR488-40 rear with a 112 link chain.
Re: z1000A2 Chain and sprockets
Z1000 530 pitch rear sprockets are not available as equivalents from other bikes but can be made.
Correction JTR488 is the equivalent
Re: z1000A2 Chain and sprockets
snowyz9 wrote:Hi Thanks , and interested in conversion kit , but sizes 40 rear 18 front ?
Yes! you need 18 - 40 or 19 - 42 to get close to the stock 2.2 -1 ratio if that's what you want.
The 530 pitch has a smaller sprocket diameter for the same number of teeth on the 630 so go as big as you can to keep the chain away from the swinger.
Re: z1000A2 Chain and sprockets
got a 18 42 on my z1000a1
Z1b, z1000a1 x 2 , Aprilia v4 Tuono factory, SV1000
Re: z1000A2 Chain and sprockets
zed 1015 , i have sent pm
Re: z1000A2 Chain and sprockets
The 530 pitch has a smaller sprocket diameter for the same number of teeth on the 630 so go as big as you can to keep the chain away from the swinger.
To further explain...530 pitch is 1/5 (20%) smaller pitch than 630 (5/8" v 6/8"). Multiplying the 630 dimension by 1.2 will increase everything by 20% and provide you with the correct sprocket dimensions and chain length equivalents while keeping the original ratio.
I am going to write a two part article on chain etc to put on my website.
Re: z1000A2 Chain and sprockets
ZedHead wrote:I am going to write a two part article on chain etc to put on my website.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Re: z1000A2 Chain and sprockets
ZedHead wrote:The 530 pitch has a smaller sprocket diameter for the same number of teeth on the 630 so go as big as you can to keep the chain away from the swinger.
To further explain...530 pitch is 1/5 (20%) smaller pitch than 630 (5/8" v 6/8"). Multiplying the 630 dimension by 1.2 will increase everything by 20% and provide you with the correct sprocket dimensions and chain length equivalents while keeping the original ratio.
I am going to write a two part article on chain etc to put on my website.
What is your website Zedhead ?? Cheers Rossco
Re: z1000A2 Chain and sprockets
Rossco wrote:ZedHead wrote:The 530 pitch has a smaller sprocket diameter for the same number of teeth on the 630 so go as big as you can to keep the chain away from the swinger.
To further explain...530 pitch is 1/5 (20%) smaller pitch than 630 (5/8" v 6/8"). Multiplying the 630 dimension by 1.2 will increase everything by 20% and provide you with the correct sprocket dimensions and chain length equivalents while keeping the original ratio.
I am going to write a two part article on chain etc to put on my website.
What is your website Zedhead ?? Cheers Rossco
It's Cybike Rossco but he doesn't come on here any more he fell out with us....
Re: z1000A2 Chain and sprockets
chrisNI wrote:Rossco wrote:ZedHead wrote:The 530 pitch has a smaller sprocket diameter for the same number of teeth on the 630 so go as big as you can to keep the chain away from the swinger.
To further explain...530 pitch is 1/5 (20%) smaller pitch than 630 (5/8" v 6/8"). Multiplying the 630 dimension by 1.2 will increase everything by 20% and provide you with the correct sprocket dimensions and chain length equivalents while keeping the original ratio.
I am going to write a two part article on chain etc to put on my website.
What is your website Zedhead ?? Cheers Rossco
It's Cybike Rossco but he doesn't come on here any more he fell out with us....
Just to clarify, I fell out with certain indivuals involved in the running of the club andnot the wider membership. I did try to extend an olive branch to the club but the powers that be rejected it. c’est la vie
Who is online
Users browsing this forum: No registered users and 139 guests