Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Dyna coils and Ballast resistor
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Dyna coils and Ballast resistor
Hi Guys, some years ago i fitted the Dyna S electronic ignition to my Z1R. Recently i decided to fit Dyna coils, that I have done. But it tells you in the instructions, when you are using the Dyna s ignition with the Dyna coils, to remove the Ballast resistor ???? so i have just un-plugged it and removed it from the bike. Is that correct ? and what dose this resistor do anyway. Thanks in advance
Re: Dyna coils and Ballast resistor
The ballast resistor limits the current to the points to prevent arcing and excessive wear.
The Dyna needs a full 12 volts which is why the resistor needs removing.
The Dyna needs a full 12 volts which is why the resistor needs removing.
Re: Dyna coils and Ballast resistor
Many thanks for the reply 
Who is online
Users browsing this forum: No registered users and 21 guests