Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Carb orings
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Carb orings
Hi I’m wanting to strip n replace the oring sun my carbs Z1000R2 dose anyone apart from Z power do a kit?
Re: Carb orings
Whatever kit you buy make sure they are VITON rubber otherwise it's a waste of time with the ethanol fuel we have.
There's one or two sellers on Ebay that do Viton O' ring kits for bike carbs so check there first.
There's one or two sellers on Ebay that do Viton O' ring kits for bike carbs so check there first.
Re: Carb orings
Agree with zed1015 about using viton, especially for the float valve seat. I used original kawasaki ones a few years ago, cost a fortune, and they started to overflow in 1 and 2 recently. Replaced them with viton ones from simplybearings, which solved the problem and look forward to many years using E5. I think they were 1.5mm section 7mm bore - £4.72 for 10pc
Kwaki lover - Z1000A1, Z1000R2, ZX9R F1P, GPz1100B1, 350 S2 and a brace of 500 H1's. For fun I've got a hooligan 350LC too yahooooo
Who is online
Users browsing this forum: No registered users and 25 guests