I have a Z1b, American import that was first UK registered in 2011, Whilst I understand that the engine and frame numbers are usually a few numbers out, the numbers on mine are 114 out. Z1F 64236, Z1E 64350.
Could they be this far apart at manufacture or is there a possibility that its had and engine swap at some point ? The bike is a keeper for me so not a problem if its to far out for factory fitted, just my curiosity.
Cheers, Kenny
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
matching numbers
Moderators: KeithZ1R, chrisu, paul doran, Taffus
matching numbers
Last edited by Kennyboy on Tue Sep 17, 2024 2:29 pm, edited 1 time in total.
Re: matching numbers
Numbers within a few hundred are the closest they usually get to matching.
Yours are very close and would have been like that from the factory.
Yours are very close and would have been like that from the factory.
Re: matching numbers
Depends on who you speak to numbers within 300 - 500 apart are considered 'Matching'.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Re: matching numbers
That's pretty close for a Z1b.
The later in the model range the wider apart the numbers became.
My Z1a has then 15 apart.
The later in the model range the wider apart the numbers became.
My Z1a has then 15 apart.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Who is online
Users browsing this forum: moizeau and 46 guests