Has anyone out there ever successfully made a hydraulic clutch slave cylinder conversion suitable for the Z1000J motor ?
I have done many on Z1300's in the past and they work very well.
Any experience welcome.
Thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Hydraulic Clutch Conversion / Z1000J
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
Z1streetfighter71
- Custard Cream
- Posts: 945
- Joined: 16th Oct 2020
- Location: Galway-Eire
Re: Hydraulic Clutch Conversion / Z1000J
zed1015 just finished a savage racecrafters build with one, build thread below. He might tune in and lend an ear. viewtopic.php?f=7&t=45726
Angus.
Too many bikes to list.
Too many bikes to list.
Re: Hydraulic Clutch Conversion / Z1000J
.Z1streetfighter71 wrote:zed1015 just finished a savage racecrafters build with one, build thread below. He might tune in and lend an ear. viewtopic.php?f=7&t=45726
Yes! Done loads.
Mostly using outrigger plates as in the attached pic but it can be done using the original sprocket cover.
Favorite slave cylinder is from a ZX7/ZX9R.
- SUNP0368.JPG (183.25 KiB) Viewed 727 times
Who is online
Users browsing this forum: No registered users and 36 guests