Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Inlet rubbers

Need help restoring, building, or finding then try here.

Moderators: paul doran, Taffus, KeithZ1R, chrisu

Post Reply
Message
Author
needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:
Contact needaz1100r

Inlet rubbers

#1 PostAuthor: needaz1100r » Thu Oct 06, 2016 6:28 pm

Could somebody with some kicking around please measure the fixing hole centres on a Z650, a Z1/900/1000 and aZ1000J.

Thanks in advance.
Cheers,

Mark.
Top
User avatar
Al
Hardcore
Hardcore
Posts: 2815
Joined: 21st Oct 2007
Location: Farnbronx, Sin City, N.E. Hants

#2 PostAuthor: Al » Thu Oct 06, 2016 6:48 pm

58mm centres for a J type.
AL
1981 J1
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 3815
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#3 PostAuthor: zed1015 » Thu Oct 06, 2016 9:52 pm

zorded wrote:58mm centres for a J type.
AL

And all the others are the same centres too.
Top
needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:
Contact needaz1100r

#4 PostAuthor: needaz1100r » Thu Oct 06, 2016 10:42 pm

Thanks Guys, that was the information I needed, but not the answer I wanted.

GS1000 are 68mm an a f**k sight more expensive.
Cheers,



Mark.
Top
markz9
Regular Poster
Posts: 70
Joined: 8th Oct 2011
Location: whitchurch

gs carb rubbers

#5 PostAuthor: markz9 » Fri Oct 07, 2016 9:56 am

what ones do you need I have quite a lot of spare standard size floating around at home
Top
needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:
Contact needaz1100r

Re: gs carb rubbers

#6 PostAuthor: needaz1100r » Fri Oct 07, 2016 11:18 am

markz9 wrote:what ones do you need I have quite a lot of spare standard size floating around at home


Hi Mak,

I need a set of early GS1000 ones, ie for the 26 or 28mm slide mikunis, not the later CVs.

Kawasaki ones aren't going to fit I now know.

Mick Znone will be along shortly to berate me for this being about a GS.

:D
Cheers,



Mark.
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3257
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#7 PostAuthor: PAULJAC47 » Fri Oct 07, 2016 3:20 pm

No he wont he is still sulking since the Brexit "debate"
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
markz9
Regular Poster
Posts: 70
Joined: 8th Oct 2011
Location: whitchurch

Gs carb rubbers

#8 PostAuthor: markz9 » Fri Oct 07, 2016 6:03 pm

Ok I am sure I have some do you need all four and are you going to Stafford bike show I am up there for weekend
z900a4 n20, z1000a1, zx10r, gs1000 Yoshi, gsxr750 & 7/1200 slabby race bikes, rgv250, dt250mx, 350cc New Hudson & Rickman
Top
needaz1100r
ZedHead
ZedHead
Posts: 1128
Joined: 11th Sep 2012
Location: Reading
Contact:
Contact needaz1100r

Re: Gs carb rubbers

#9 PostAuthor: needaz1100r » Sat Oct 08, 2016 1:48 pm

markz9 wrote:Ok I am sure I have some do you need all four and are you going to Stafford bike show I am up there for weekend


That would be bloody brilliant matey, yes I need all 4, my bike had oversize rubbers for flatslides.

I am hoping to get up there, but if I can't I know a few that are.

If you PM me your mobile I'll let you know.

Thanks again.
Cheers,



Mark.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 162 guests