Page 1 of 1
Cannot find old thread.
Posted: Tue Oct 10, 2017 5:55 pm
Author: stevie g
Hi Guys, can someone point me in the direction of an old thread on here regarding fitting a Z1000 engine into a zeph 750 please. Picked up an engine the other day ( Z thou ) and I may have access to a frame. Thanks, $tevie.
Re: Cannot find old thread.
Posted: Tue Oct 10, 2017 9:06 pm
Author: zed1015
Steve.
Do you mean my Café racer thread ?
viewtopic.php?t=14312 I can tell you anything you need to know but it isn't an easy fit.
Are you going to Stafford ?
Re: Cannot find old thread.
Posted: Wed Oct 11, 2017 7:52 am
Author: ADRIAN H
zed1015 wrote:Steve.
Do you mean my Café racer thread ?
viewtopic.php?t=14312 I can tell you anything you need to know but it isn't an easy fit.
Are you going to Stafford ?
No pics ?
Re: Cannot find old thread.
Posted: Wed Oct 11, 2017 9:01 am
Author: zed1015
ADRIAN H wrote: No pics ?
Log in using Google Chrome as your browser and there is a free app
https://chrome.google.com/webstore/deta ... dkpmcpkaon that enables Photobucket pics to be seen.
Re: Cannot find old thread.
Posted: Wed Oct 11, 2017 9:10 pm
Author: stevie g
Hi, not sure, I cannot see any of the pics for some reason. I think I remember you had to cut the frame to get the lump in, is that correct ? Update: I can see it now, yes that's the one. Thanks. I'll be asking you question soon. Cheers $tevie.
Re: Cannot find old thread.
Posted: Wed Oct 11, 2017 9:53 pm
Author: zed1015
Yes! I had to cut the frame and re-make every engine mount using a jig I made.
It is a very tight fit and the engine won't go in with the head on.
Not really an engine swap but a complete re-design.
A lot of the work with the jig etc is not in the thread because it got lost when the site went down a few years ago.
Re: Cannot find old thread.
Posted: Thu Oct 12, 2017 4:49 pm
Author: stevie g
Hmm, Think that is too far beyond me. Shame cos I love the Zeph 750 look. I've got a Z 750 frame too, wonder if it'll go into that ? There's no head on it at the mo so I stuck it into a zeph 550 frame, went in no probs but when I roughly measured my CSR 1000 engine it was way too tall, was hoping the zeph 750 frame would be a bit taller, bummer. Thanks for the advice, appreciated mate, $
Re: Cannot find old thread.
Posted: Thu Oct 12, 2017 4:59 pm
Author: zed1015
1000 engine will go into z650/750 frame.
It's still tight though, no major frame surgery needed just engine mounts but it creates some other niggles that need sorting.
The fuel tank tends to hit the camcover and the engine needs to come out to do the shims etc.
Re: Cannot find old thread.
Posted: Thu Oct 12, 2017 8:22 pm
Author: stevie g
OK all good to know. Might be another project over the Winter, Thanks Mate, $