Nice simple job !!
Fitting a new chain to my Z1a, after struggling to push the link sideplate on, I noticed that the tool that I had loaned from a mate was not correct.
The holes in the internal piece were too close together by about 3mm, hence I could not shove the plate on (see attached).
(and I expected the piening bit to be the difficult part)
Could anyone advise what I should buy / method I should use to join the chain...
Thanks
Cas
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
New Chain
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: New Chain
Looking on Ebay there is no reference of link spacings ?
Are they all the same
Are they all the same
Past 5 Years
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
Re: New Chain
I have the same tool and there are a couple of different spaced attachments for different chain pitches.
Think you may have the 530 one there and you need the 630 which is 1/8th inch (3mm approx.) longer between pins.
Just use the press tool without the attachment and work the side plate on alternatively from one pin to the other with the hollow press bolt, making sure not to go too far which will crush the 'O' rings.
Think you may have the 530 one there and you need the 630 which is 1/8th inch (3mm approx.) longer between pins.
Just use the press tool without the attachment and work the side plate on alternatively from one pin to the other with the hollow press bolt, making sure not to go too far which will crush the 'O' rings.
Re: New Chain
Thanks Rob, will give it a go.
Past 5 Years
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
Re: New Chain
Proper chain riveting tool is the ideal tool but i have always used an old vice which i use an old sledge hammer head in as an anvil,let the chain droop down after fitting and use a concave metal punch to peen the pin links over,others will disagree but has always been a trusted technique for me.
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-
- 100Club
- Posts: 303
- Joined: 3rd Aug 2013
- Location: Australia
Re: New Chain
PAULJAC47 wrote:Proper chain riveting tool is the ideal tool but i have always used an old vice which i use an old sledge hammer head in as an anvil,let the chain droop down after fitting and use a concave metal punch to peen the pin links over,others will disagree but has always been a trusted technique for me.
That all sounds very level headed & makes perfect sense to me Paul ........."Up there for thinking & down there for dancing aye ! "
Who is online
Users browsing this forum: shaggy and 163 guests