I've been offered a set of Dyna 1 5 ohm coils by a friend and wondered if anyone has any experience of using them and mods required .
Cheers.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
1.5 ohm Dyna coil fitting
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: 1.5 ohm Dyna coil fitting
For what bike ?
Most zeds use 3ohm on points and 2.2 ohm on ic ignitors.
You can only use a higher resistance coil not lower otherwise you will overheat components.
The only use for the 1.5 ohm on the big zeds is to run 2 pairs in series to give the equivalent of two 4 pole 3ohm coils for use on duel plugged heads.
Most zeds use 3ohm on points and 2.2 ohm on ic ignitors.
You can only use a higher resistance coil not lower otherwise you will overheat components.
The only use for the 1.5 ohm on the big zeds is to run 2 pairs in series to give the equivalent of two 4 pole 3ohm coils for use on duel plugged heads.
Who is online
Users browsing this forum: Bing [Bot] and 157 guests