Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
dyna s
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- 100Club
- Posts: 196
- Joined: 1st Jun 2014
- Location: MANCHESTER
dyna s
when fitting dyna s with origanal coils ,to cold fit what do you do..rig up a bulb and see it light when the f hits the mark...nb i don't have a strobe and I'm shite with a tester.cheers.
Re: dyna s
No need for any bulbs etc, With the dyna fitted you will hear the plug fire with an audible tick even when it's still in the cylinder or you can just lay the plug on the head and view the spark.
You can static time on full 40 degs advance mark rather than the idle mark by holding the rotor fully clockwise against the bob weights as you turn the crank with a spanner.
Once set there's no real reason to strobe it as it won't alter when running.
You can static time on full 40 degs advance mark rather than the idle mark by holding the rotor fully clockwise against the bob weights as you turn the crank with a spanner.
Once set there's no real reason to strobe it as it won't alter when running.