Hi .....
I am starting a cyl head rebuild and have an issue with valve stem seals
The original ones were removed while the head was at the vapour blasters, the problem is the new ones will not stay fitted to the valve guide, should they latch on the guide or move up and down the valve stem
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1 head build
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Z1 head build
Last edited by garybrez on Fri Jul 09, 2021 7:45 pm, edited 1 time in total.
Re: Z1 head build
Also, should the valve guides have a groove for the seal to locate in
Last edited by garybrez on Fri Jul 09, 2021 7:44 pm, edited 1 time in total.
Re: Z1 head build
Yes! top of guide should have a groove .
Who is online
Users browsing this forum: No registered users and 137 guests