hi all,
does anyone know if the carb rubbers to head need to be sealed with anything before being fitted ,am fitting some flatslides to it but didnt want any leaks ??
ta
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
z900 a4 carb rubbers
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: z900 a4 carb rubbers
By the book with new rubbers they shouldn't need any sealer but i put a bead of Vtec Vital black on the head and then lightly seat the rubbers without fully tigtening.
I leave it overnight to cure , tighten then peel off the excess from inside and out.
Never had any any leaks when doing that even on my Supercharged one which uses the stock carb rubbers for mounting.
I leave it overnight to cure , tighten then peel off the excess from inside and out.
Never had any any leaks when doing that even on my Supercharged one which uses the stock carb rubbers for mounting.
Re: z900 a4 carb rubbers
Ok thanks for that , will give it a go.
Who is online
Users browsing this forum: No registered users and 87 guests