Original Finish on rear axle, swing arm ,engine mounts

[shaggy]

Hi another question for them that know what finish is correct and original for rear axle shaft nut and spacers.
Swing arm shaft nut and spacers.
Rear motor mount spacers.

[zed1015]

Zinc plated.

[Philippe]

Hi

I think that the swing arm nut ( the big one that sits on the left hand side of the frame) was chromed...correct me if I'm wrong please.
GrtZ
Philippe

[z1bman]

Hi

I think that the swing arm nut ( the big one that sits on the left hand side of the frame) was chromed...correct me if I'm wrong please.
GrtZ
Philippe

No Philippe it was zinc plated

[Philippe]

Hi Z1B man

thank you! Another lesson learned.
GrtZ
Philippe

[z2.john]

As far as I'm aware, the nut is chrome. All other items asked about are clear zinc

[r3sc]

I’m also with the nut being chrome and all other items BZP!

[Z1streetfighter71]

Not that im a reliable source but the part is listed as 42045-018 but says nothing on the finish but i have 3.. 2 rusted zinc the other chromed.

[z2.john]

That is the rear axle nut which correctly is Zinc. Swing arm nut is Chrome

[Philippe]

Hi z2.John

I'm glad you confirm my thoughts. All the Z bikes I have, have a chromed swing arm nut.
I was afraid that I was wrong all the time.
Only the Z1000H has a zinc plated swing arm nut.
GrtZ
Philippe

[z2.john]

item 8 below

[Z1streetfighter71]

That is the rear axle nut which correctly is Zinc. Swing arm nut is Chrome

Take me to misread the brief but on a side note the page you posted above is it from a book or an online pdf i can source? thanks