Governor-breaker advance/retard is this wrong?

[thewormman]

I have a KZ900 I'm trying to get going. It had a Dyna electronic ignition on it that was knackered so I am putting it back to points. Ive got the plate, points, condensers but the advance /retard plate doesn't look its original.

Could you knowledgable people have a look and tell me if its wrong and if so how I can get a replacement?

Thanks

[zed1015]

That is the correct 005 20/40 degree advancer for all Z900, Z1000 up to the Z1R D1 .
The rotor needs swapping for a cam though if you want to run points.

[thewormman]

That is the correct 005 20/40 degree advancer for all Z900, Z1000 up to the Z1R D1 .
The rotor needs swapping for a cam though if you want to run points.

Thanks, is it possible to get the rotor separately, do you know who would sell them, thanks very much for your help

[zed1015]

I'd put an ad in the wanted section.
There's ton's of people who have fitted Dyna ignitions so there's bound to be a few points cams going spare..

[gray]

John Browse is worth a try

[KeithZ1R]

Have you found one yet