Hello gents could anyone tell me how to prime the oil pump on a gpz 1100 please I've been told i need to do this after replacing the oil pan.
Many thanks in advance John
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Oil pump priming
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Oil pump priming
You don't really need to prime the pump unless it's a fresh built motor and then spinning the motor on the starter for a few seconds with the plugs out or the kill switch off to circulate the oil is all you need to do.
Just replacing the pan and filling with fresh oil on a relatively recently run engine won't need that.
Just replacing the pan and filling with fresh oil on a relatively recently run engine won't need that.
Re: Oil pump priming
Thanks very much for that Rob
Who is online
Users browsing this forum: pjc, sockpuppet and 26 guests