Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

S&S intermediate jets .033" and .036" wanted for the Drouin.

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
User avatar
zed1015
Hardcore
Hardcore
Posts: 4013
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

S&S intermediate jets .033" and .036" wanted f

#1 PostAuthor: zed1015 » Fri Jul 22, 2011 12:50 pm

Help!
Bit of a long shot but has anyone got any S&S intermediate jets i can beg ,borrow or even buy :shock:
They are the same fitment for all the S&S range
Narrowed it down a bit now so only need .033" and .036"
Thanks in advance.
Rob.
Last edited by zed1015 on Tue Jul 26, 2011 7:32 pm, edited 1 time in total.
Top
stubby
new poster
Posts: 14
Joined: 1st Jul 2011
Location: east yorks , patrington

#2 PostAuthor: stubby » Mon Jul 25, 2011 9:39 am

rob i have some 0.9mm 1.00mm 1.1mm 1.2mm drills you can borrow to drill out your existing jets if you cannot source any larger ones.
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 4013
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

#3 PostAuthor: zed1015 » Mon Jul 25, 2011 10:21 am

Thanks for the offer but i've already drilled out a spare jet to the S&S max size of .040" (1mm) which has eliminated the problem i had which was caused by too small an intermediate .
I now need a selection of jets so that i can work down from the very rich condition i have now.
Cheer's.
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 15 guests