Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

My Z Project

Work in Progress

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
Anuar Kamaruddin
Regular Poster
Posts: 57
Joined: 8th Aug 2011
Location: Kuala Lumpur,Malaysia

My Z Project

#1 PostAuthor: Anuar Kamaruddin » Mon Aug 29, 2011 1:57 am

25 years after the last ride and stored in the garage,I finally decided to do the Z and ride again.It will take some time to be completed,by year end I predict.The JMC swing arm gives no space to mount the master cylinder rod with the Tarozzi rear set.Thanks Mr Administrator,Danny and Jappen for the kind response to my queries.Image



Received the AN-3 [Blue] fitting from ANPlumbing to complete the rear brake.Image

But still short of the master cylinder,trying to fabricate a bracket for the MCylinderImage
Last edited by Anuar Kamaruddin on Mon Sep 26, 2011 3:21 pm, edited 8 times in total.
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 2255
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#2 PostAuthor: london calling » Mon Aug 29, 2011 6:27 am

http://www.z1ownersclub.co.uk/forum/vie ... hp?t=14667
Jack
Top
NicksGB
Regular Poster
Posts: 28
Joined: 2nd Jul 2009

#3 PostAuthor: NicksGB » Mon Aug 29, 2011 10:42 am

Look forward to seeing the progress

:D
Z1100 '83 SHAFT
Top
Anuar Kamaruddin
Regular Poster
Posts: 57
Joined: 8th Aug 2011
Location: Kuala Lumpur,Malaysia

#4 PostAuthor: Anuar Kamaruddin » Mon Aug 29, 2011 3:30 pm

london calling wrote:http://www.z1ownersclub.co.uk/forum/viewtopic.php?t=14667

Thanks Jack,
AK
Kuala Lumpur
Top
User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

#5 PostAuthor: Pigford » Mon Aug 29, 2011 3:41 pm

Very nice - whats the motor spec :twisted:
And on the 7th day... Zeds were created!
Top
Anuar Kamaruddin
Regular Poster
Posts: 57
Joined: 8th Aug 2011
Location: Kuala Lumpur,Malaysia

#6 PostAuthor: Anuar Kamaruddin » Mon Aug 29, 2011 3:55 pm

Pigford wrote:Very nice - whats the motor spec :twisted:

Thanks,specs are :1015cc + Yoshimura Cams and Closed Ratio tranny,Dyna Ignition,35mm Keihin Smoothbores and an old and aged J&R 4 into 1 exhaust.The rest are still standard issue items.The shopping and wish list is killing me.
AK
Top
User avatar
london calling
Hardcore
Hardcore
Posts: 2255
Joined: 16th Apr 2004
Location: Loughborough, East Midlands

#7 PostAuthor: london calling » Mon Aug 29, 2011 4:41 pm

No worries Anuar.
The bike looks good for 25 years in storage :wink:
Jack
Top
sanderz
Custard Cream
Custard Cream
Posts: 849
Joined: 2nd Mar 2010
Location: Manchester

#8 PostAuthor: sanderz » Mon Aug 29, 2011 10:12 pm

Bikes looking good there Anuar :up keep us posted on its progress.

I'm sure other members with Z1000's using a similar set up as yours - Tarozzi rearsets / bigger swingarm will have had a similar problem with the master cylnder rod. You could always post in 'Bike help' for possible solutions.
Wots up DOHC
Top
Anuar Kamaruddin
Regular Poster
Posts: 57
Joined: 8th Aug 2011
Location: Kuala Lumpur,Malaysia

#9 PostAuthor: Anuar Kamaruddin » Mon Aug 29, 2011 11:00 pm

sanderz wrote:Bikes looking good there Anuar :up keep us posted on its progress.


Thanks forthe support Sanderz,will post progress and thanks again from Kuala Lumpur,Malaysia
Top
Padders
Hardcore
Hardcore
Posts: 3045
Joined: 15th Jan 2006
Location: Grimsby Lincolnshire

#10 PostAuthor: Padders » Tue Aug 30, 2011 3:48 pm

Looks like a great project keep the photo's coming and welcome aboard.
Top
Anuar Kamaruddin
Regular Poster
Posts: 57
Joined: 8th Aug 2011
Location: Kuala Lumpur,Malaysia

#11 PostAuthor: Anuar Kamaruddin » Wed Aug 31, 2011 5:01 am

Padders wrote:Looks like a great project keep the photo's coming and welcome aboard.

Thanks Padders,I believed,my z1000 is the only 1 survived in Malaysia.
Regards
Top
User avatar
paul doran
Area Rep.
Area Rep.
Posts: 9214
Joined: 24th Sep 2004
Location: near Dublin Ireland

#12 PostAuthor: paul doran » Thu Sep 01, 2011 1:05 pm

Anuar Kamaruddin wrote:
Padders wrote:Looks like a great project keep the photo's coming and welcome aboard.

Thanks Padders,I believed,my z1000 is the only 1 survived in Malaysia.
Regards


Anuar is there no Z900 over there ?
way too many Zeds
Top
Baldylocks
Regular Poster
Posts: 98
Joined: 16th Jun 2011
Location: London ish

#13 PostAuthor: Baldylocks » Sun Sep 04, 2011 8:33 pm

Nice Bike...are you going to use Lockheed Calipers on the front? I have Brembo's and My Z1r, also the Tarozzi rearsets are a bit of a pain to fit to standard Bikes I had to bend the Brake rod to fit on my Z1r as it didn't line up..
Bugger ! whose Idea was that!

'78 Z1r '79 z650/1100 '77 Seeley H**** 750 GPz1100 B2 '86 GSXR750R Ltd '97 KTM620 '76 S3a 400
Top
Anuar Kamaruddin
Regular Poster
Posts: 57
Joined: 8th Aug 2011
Location: Kuala Lumpur,Malaysia

#14 PostAuthor: Anuar Kamaruddin » Tue Sep 06, 2011 3:10 am

Thanks ,yes a pair of CP2696 Lockheeds in front,the Tarozzi rear brake linkages is a big problem to me too,especially with the JMC arm,anyway have to fa bricate own bracket for the master cylinder. Cheers
Last edited by Anuar Kamaruddin on Tue Sep 06, 2011 3:25 am, edited 1 time in total.
Top
Anuar Kamaruddin
Regular Poster
Posts: 57
Joined: 8th Aug 2011
Location: Kuala Lumpur,Malaysia

#15 PostAuthor: Anuar Kamaruddin » Tue Sep 06, 2011 3:17 am

There were a few Z1,Z900 and the KZ1000,12 /13 pieces, most went AWOL,I have a Z900 and the Z1000.A friend of mine is restoring a Z1 And that makes 2 and a half cos someone stole the Crankcase of my Z900 from the garage.Cheers
Top
Post Reply

Return to “Projects”

Who is online

Users browsing this forum: No registered users and 34 guests