But I do need help, the lecky system is pumping out 16v+ ( 14.2 with the lights on ) is it the Rectifier, regulator or both.
Can I fit another item from a different model??????
Geoff
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
KZ900A4 Boiling battery
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Geoff Meager
- Custard Cream
- Posts: 732
- Joined: 5th Apr 2007
- Location: Dereham. Norfolk.
KZ900A4 Boiling battery
Yes I know.....I'm a Knobber.....I put this on the Discussion Board 1st......
But I do need help, the lecky system is pumping out 16v+ ( 14.2 with the lights on ) is it the Rectifier, regulator or both.
Can I fit another item from a different model??????
Geoff
But I do need help, the lecky system is pumping out 16v+ ( 14.2 with the lights on ) is it the Rectifier, regulator or both.
Can I fit another item from a different model??????
Geoff
______________
PAID UP MEMBER
WITH NO ZED
PAID UP MEMBER
WITH NO ZED
Geoff, the problem is most likely with the regulator, not controlling the voltage and hence, a battery boil. The voltage should be no more than 14 Volts at 3000rpm across the battery terminals. If you are replacing use a reg/rectifier combined unit, which are readily available.
There are many other replacements you can use. I always try to get a second-hand, ZRX650 unit, some swear by the HondX "Dream" unit.
RegardZ.
There are many other replacements you can use. I always try to get a second-hand, ZRX650 unit, some swear by the HondX "Dream" unit.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Who is online
Users browsing this forum: No registered users and 46 guests