Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Push Pull throttle?

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
LeeJackson
100Club
100Club
Posts: 479
Joined: 17th Oct 2015
Location: Aberdeen, Scotland

Push Pull throttle?

#1 PostAuthor: LeeJackson » Sun Sep 25, 2016 9:03 am

Hi guys, I need to order up a push pull throttle for my flat slides. I see so far only two options, motion pro and APE. Are there any others? These look pretty similar but is one better than the other? Am I missing any better options? Had some bad experience with aftermarket throttles before so thought best to check :)

Thanks
Lee
Top
martinz1000r
Custard Cream
Custard Cream
Posts: 919
Joined: 1st Jul 2007
Location: Oxfordshire

#2 PostAuthor: martinz1000r » Sun Sep 25, 2016 10:51 am

I use motion pro. I think you'll find the APE version is Motion Pro too. No issues at all other than the allen screws at handlebar end are steel and rust in seconds. Easy fix though. I also have a Yamaha twin cable throttle but the motion pro has longer cables so easier to get decent routing.

If you are using CR carbs connect the cables before you fix the carbs in to the rubbers otherwise your fingers just wont bend in enough angles.
Z1000R, Moto Martin GPz, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, SP1 Hoonda x 2, Katana 1100, Bimota SB6R and Tuatara
Top
User avatar
Al
Hardcore
Hardcore
Posts: 2916
Joined: 21st Oct 2007
Location: Farnbronx, Sin City, N.E. Hants

#3 PostAuthor: Al » Sun Sep 25, 2016 1:41 pm

As above. I have a motion pro from Ray on 36mm RS flatslides like you now have. No issues, straight fit no drama. Spare cables are also available. Had a DR 400 Suzuki one before and was quoted £40 just for new cables!

AL
1981 J1
Top
LeeJackson
100Club
100Club
Posts: 479
Joined: 17th Oct 2015
Location: Aberdeen, Scotland

#4 PostAuthor: LeeJackson » Sun Sep 25, 2016 2:17 pm

Thanks guys. I'll get one of them ordered from Debben
Top
User avatar
tlc
Hardcore
Hardcore
Posts: 4136
Joined: 6th Nov 2007
Location: Aylesbury

#5 PostAuthor: tlc » Sun Sep 25, 2016 7:25 pm

I use the same and just bought new cables for it.

No dramas and looks dead cool.
Asphalt Cowboy Z1100R, 1981 Z1000J
Top
User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

#6 PostAuthor: Pigford » Sun Sep 25, 2016 9:06 pm

I'm using a Yam R1 throttle assembly on me harris - works good.

Image
And on the 7th day... Zeds were created!
Top
HowieD
100Club
100Club
Posts: 367
Joined: 5th Feb 2008
Location: Lincoln

#7 PostAuthor: HowieD » Mon Sep 26, 2016 8:29 pm

Horace is fitted with a universal Push / Pull kit from Venhill
CD185, Maggot, Z1-R, Horace, Monster 620ie
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 75 guests