Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Locating dowels
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Locating dowels
Just a question, the little locating dowels or pins that are in the crankcase for crank alignment, are they fixed or do they have to come out for crankcase cleaning, also while the engine is down, what internals should be replaced as a matter of course, engine done 33k, cheers
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: Locating dowels
Dowels will come out - but often real tight - due to oil & suction sometimes!
And on the 7th day... Zeds were created!
Re: Locating dowels
as for parts inspect them meticulously, if you have any doubts about them, replace it as you will only be worried about it when the engine goes back together (well that's my opinion anyway).
during my z1100r engine build I replaced both sides of 2nd gear and all the gearbox bearings, had the crank rebuilt with new bearings and replaced cam chain. I also stripped and cleaned the oil pump, in the bottom end.
during my z1100r engine build I replaced both sides of 2nd gear and all the gearbox bearings, had the crank rebuilt with new bearings and replaced cam chain. I also stripped and cleaned the oil pump, in the bottom end.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Who is online
Users browsing this forum: No registered users and 60 guests