Z650 Shims

[wheelysteve]

What's the process for swapping shims for the under bucket 13mm items as fitted to the Z650 etc.?

Cheers Steve

[kev edwards]

Take all measurements while cold, remove cams see what sizes are under bucket swap around and replace those needed, replace cams turn engine over a couple of times, recheck, if ok run up to temp, check again next day when cold.

[warren3200gt]

Are you asking what you have to do/get if you want to swop from over bucket (z900) to under bucket (z650)? or as Kev posted how to swop shims on a existing under bucket set up?

[wheelysteve]

Sorry, I was asking how the shim swapshop works for the smaller under bucket jobs. I need 5 smaller thickness shims for one of my 650's. I've used the shim exchange for the Z1 that Jerry looks after but I know he doesn't do the smaller ones.

The club has a 13mm shim collection available on a swap basis, but who looks after now and how does it work?

Cheers Steve

[KeithZ1R]

Sorry, I was asking how the shim swapshop works for the smaller under bucket jobs. I need 5 smaller thickness shims for one of my 650's. I've used the shim exchange for the Z1 that Jerry looks after but I know he doesn't do the smaller ones.

The club has a 13mm shim collection available on a swap basis, but who looks after now and how does it work?

Cheers Steve

contact Steve Parr he has the shims ?I believe

[warren3200gt]

viewtopic.php?f=4&t=15719

[wheelysteve]

Thanks ......pm sent to Steve