After my sprocket nut coming undone (big thankyou to RobW for rescuing me from the roadside) I need a sprocket with 2mm more offset so that I don't need a washer behind the sprocket and then the tab washer will have enough to hold onto, my current sprocket is marked BA523-15, does anyone know what offset this is?
Also where is a good place to get sprockets from?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Unitrac offset sprockets
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Julian_Boolean
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Unitrac offset sprockets
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
-
Julian_Boolean
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Unitrac offset sprockets
With further investigation, looks like this is a standard Unitrak front sprocket, so I just need to find out how much offset it has
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
-
martinz1000r
- Custard Cream
- Posts: 919
- Joined: 1st Jul 2007
- Location: Oxfordshire
Re: Unitrac offset sprockets
I can relate to that! Mine came off at Donington. Apparently they are infamous for it. Lock washer is still available from Kawasaki. Off set sprockets then Chris at Grumpy or Debben will see you right.
BTW unbeknown to me when my sprocket let go the chain chewed in to the lower frame rail like a chain saw. Apparently i was very lucky it didn't throw itself through the engine case.
BTW unbeknown to me when my sprocket let go the chain chewed in to the lower frame rail like a chain saw. Apparently i was very lucky it didn't throw itself through the engine case.
Z1000R, Moto Martin GPz, z900 A4 Crosby Replica, Harris Magnum 2, Suzuki GSXR 1100 Slabbie, SP1 Hoonda x 2, Katana 1100, Bimota SB6R and Tuatara
-
Julian_Boolean
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Unitrac offset sprockets
Mine came off at about 80mph, made a whizz noise as it rested on the end of the shaft, so Ii guess I was lucky.
Had a look on the internet and a GPZ1000RX sprocket has 1mm more offset, so this would be better, ZZR 1100 sprocket has 6mm more offset but I don't think it's available in 630.
Tempted to go to a 16 tooth sprocket if I'm changing it ambit currently feels a bit under geared.
Had a look on the internet and a GPZ1000RX sprocket has 1mm more offset, so this would be better, ZZR 1100 sprocket has 6mm more offset but I don't think it's available in 630.
Tempted to go to a 16 tooth sprocket if I'm changing it ambit currently feels a bit under geared.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
-
Julian_Boolean
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Unitrac offset sprockets
According to my research
630 Chain Roller Width = 9.53 mm
Therefore my standard sprocket which has a overall width of 18mm has an offset of 8.47 mm
GPZ1000RX sprocket has overall of 19 mm therefore offset = 9.47 mm
3/8 offset = 9.53 mm
So I might as well get a GPZ1000RX sprocket as it's only 0.06 of a mm less offset.
Shame I can't find a 10mm offset sprocket.
630 Chain Roller Width = 9.53 mm
Therefore my standard sprocket which has a overall width of 18mm has an offset of 8.47 mm
GPZ1000RX sprocket has overall of 19 mm therefore offset = 9.47 mm
3/8 offset = 9.53 mm
So I might as well get a GPZ1000RX sprocket as it's only 0.06 of a mm less offset.
Shame I can't find a 10mm offset sprocket.
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Re: Unitrac offset sprockets
Early zx10 has an offset front sprocket. It's the one I have fitted to mine.
Rob
Rob
Z1100R, RD 125LC, Zx7r , Endurance racer, zx4rr
Re: Unitrac offset sprockets
Talk to ray at debben he will know what is best.
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
-
Julian_Boolean
- Custard Cream
- Posts: 804
- Joined: 20th Oct 2016
- Location: Ipswich
Re: Unitrac offset sprockets
Robw wrote:Early zx10 has an offset front sprocket. It's the one I have fitted to mine.
Rob
Ordered a GPZ1000RX 630 sprocket, same offset as ZX10 but 630 rather than 530
An expanding collection of parts pretending to be a Z1100R and a Yamaha FZ750
Who is online
Users browsing this forum: Bing [Bot] and 44 guests