#2 PostAuthor: PAULJAC47 » Mon Jan 22, 2018 3:20 pm
Hi Graham.Have done similar on my a2 project,you already have the splitter hopefully with brake switch and brake lines and rotors source a pair of z9 a4 or thou a1 or a2 calipers plus mounting brackets,the rh on is more difficult to find but with a bit a machining a lh one can be used,parts to rebuild calipers are readily sourced.i have used one of the double disc m/c,s David Silver stock for Cb 750,http://www.davidsilverspares.co.uk/CB750F2-(Single-overhead-cam)/part_126550/ the same as a lot fitted to big Kwaks as is period looking.The mc,s are also on ebay i sourced a couple from Maitland Racing at Stafford show,If you can find 5mm rotors thats ideal,but if you use a 7mm disc rotors as fitted to the single disc usa kz,s think about fitting progressive fork springs and use heavier weight fork oil as the front end unsprung weight goes way up with a pair of 7mms .If you want pointing the right direction Pm me,i may also have some thou calipers etc if you want to go that way.Cheers Paul J
Last edited by
PAULJAC47 on Mon Jan 22, 2018 5:02 pm, edited 2 times in total.
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
!)
