Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000J/GPz1100 bits for sale
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Z1000J/GPz1100 bits for sale
Hi,- yes please Keith Foulsham.
My address:- 14 Bathingbourne Farm.
Bathingbourne Lane,
Sandown. Isle'O'Wight.
PO36 0 LU
My address:- 14 Bathingbourne Farm.
Bathingbourne Lane,
Sandown. Isle'O'Wight.
PO36 0 LU
Re: Z1000J/GPz1100 bits for sale
Keefleaf wrote:Hi,- yes please Keith Foulsham.
My address:- 14 Bathingbourne Farm.
Bathingbourne Lane,
Sandown. Isle'O'Wight.
PO36 0 LU
I'll send you a PM.
Re: Z1000J/GPz1100 bits for sale
Keefleaf wrote:Hi,- yes please Keith Foulsham.
My address:- 14 Bathingbourne Farm.
Bathingbourne Lane,
Sandown. Isle'O'Wight.
PO36 0 LU
Hi Keith,
Can you please reply to my PMs about payment and I'll get the adjusters sent out? I have them packaged and ready to go.
Cheers,
Coose
Re: Z1000J/GPz1100 bits for sale
Hi
If the sprocket carrier is still available, could you do £25 posted for the better one?
Many thanks
If the sprocket carrier is still available, could you do £25 posted for the better one?
Many thanks
Re: Z1000J/GPz1100 bits for sale
Chesil wrote:Hi
If the sprocket carrier is still available, could you do £25 posted for the better one?
Many thanks
It's quite heavy so I'm afraid that I couldn't. Let me work out what the postage would be and I'll come back to you.
Re: Z1000J/GPz1100 bits for sale
Okey Dokey...... cheers, if it helps to remove the sprocket, that’s fine as long as the bolts and washers are remaining
Ta
Ta
Re: Z1000J/GPz1100 bits for sale
Chesil wrote:Okey Dokey...... cheers, if it helps to remove the sprocket, that’s fine as long as the bolts and washers are remaining
Ta
I'm sorry, work has got in the way today and unfortunately will again tomorrow, but I should be able to work something out on Friday it that's ok?
Re: Z1000J/GPz1100 bits for sale
Yeah no worries, absolutely no rush chap.
Re: Z1000J/GPz1100 bits for sale
Chesil wrote:Yeah no worries, absolutely no rush chap.
PM sent.
Re: Z1000J/GPz1100 bits for sale
Pm Sent
Re: Z1000J/GPz1100 bits for sale
Front & rear calipers and rear light bracket sold. I may have other stock parts off my J if anyone needs owt?
Re: Z1000J/GPz1100 bits for sale
Coose, I am after a swinging arm spindle and nut, also the front spindle and nuts.
Cheers Rob
Cheers Rob
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer, gpz1100b1
- 8 Valve Mark
- Custard Cream
- Posts: 966
- Joined: 3rd Nov 2016
- Location: Glasgow, tropical west Scotland
Re: Z1000J/GPz1100 bits for sale
hi rob, if coose can't help i have a spare swing arm spindle n nut..
Re: Z1000J/GPz1100 bits for sale
Cheers. I will bear that in mind
Rob
Rob
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer, gpz1100b1
Re: Z1000J/GPz1100 bits for sale
Robw wrote:Coose, I am after a swinging arm spindle and nut, also the front spindle and nuts.
Cheers Rob
Hi Rob,
Leave it with me and I'll have a look to see what I have, hopefully tomorrow.
Cheers,
Coose
Who is online
Users browsing this forum: No registered users and 35 guests