As the genuine shop manual makes no reference to the head sizes, can anyone please confirm what the standard size valves should be in a 78 Z1R ?
I have 30mm for exhaust and 36mm for inlet
They are all of the round collet type.
Additionally, the valve sets offered by Z-Power also have no head size reference either. Very helpful.
Thanks Will
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Standard valve sizes for Z1R D1
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Standard valve sizes for Z1R D1
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2
Re: Standard valve sizes for Z1R D1
All the same size on all the kickstart engines.
36mm in and 30mm ex.
Early 900 motors has squared collet groove and the rest are round.
36mm in and 30mm ex.
Early 900 motors has squared collet groove and the rest are round.
Re: Standard valve sizes for Z1R D1
Thought as much Rob, just testing my aging sanity.
Just sorting through my old valve train parts, found a set of 38mm inlet and 32mm exhaust Manley valves out of my old Manzano head when I used to drag race in the 80s.
Just sorting through my old valve train parts, found a set of 38mm inlet and 32mm exhaust Manley valves out of my old Manzano head when I used to drag race in the 80s.
Kawasaki GPz750T, Kawasaki ZRX1100R, Kawasaki GPZ1000RX, H**** VF1000RG Rothmans, H**** VF500F2F, H**** CB1100RD, Suzuki GSX1100EFE, H**** XL125K2
Re: Standard valve sizes for Z1R D1
I think the square tops, MKII etc have the bigger valves?
paid up member
Re: Standard valve sizes for Z1R D1
rpeters wrote:I think the square tops, MKII etc have the bigger valves?
Square top MK2/ST etc have the same 30/36 valves.
It's just the H type injection heads that has them 1mm bigger at 31/37.
Who is online
Users browsing this forum: No registered users and 153 guests