Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Head studs
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- Custard Cream
- Posts: 910
- Joined: 31st Mar 2014
- Location: Runcorn
Head studs
Hey all, what’s the easiest way to fit new exhaust clamp studs? Every time they’re wound in, they come back out when removing nut, unless held/butchered in place with mole grips?
Re: Head studs
What nut are you using ..Lock nut ? and running it down to the plain portion to screw the stud in.
You need to lock two normal nuts together and tighten the stud in with a drop of Loctite.
Then unlock the nuts and remove them.
Stud shouldn't come out if tightened correctly.
You need to lock two normal nuts together and tighten the stud in with a drop of Loctite.
Then unlock the nuts and remove them.
Stud shouldn't come out if tightened correctly.
Re: Head studs
Use a domed nut with a ball bearing inside to screw them in then the domed nut comes undone easily.
Gus
Gus
"Set the GRINDER on it"
Who is online
Users browsing this forum: No registered users and 236 guests