I have an odd one here. Has anyone ever seen this type of bearing
bush being used in standard Z1000-A2 fork bottoms.
It 40 OD X 36 ID X 10 mm H and is not a split bearing.
If so does anyone know where I can source them from?
Cheers Mike
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000-A2 Fork bush
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
DogsbolloxofZ1B
- Hardcore
- Posts: 1440
- Joined: 28th Feb 2006
- Location: Near Chichester
Z1000-A2 Fork bush
- Attachments
-
- Z1000-A2 Fork tube
-
kev edwards
- Hardcore
- Posts: 2148
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: Z1000-A2 Fork bush
Seen these before and believe they are not available.
Re: Z1000-A2 Fork bush
Try searching online using bush dimensions rather than bike model or part number. I found lower bushes at pyramid parts that fit a gpz1100b like that.
Olly
Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Re: Z1000-A2 Fork bush
nearest i can find
https://www.motorcycleproducts.co.uk/40 ... s/1/019503
https://www.motorcycleproducts.co.uk/40 ... s/1/019503
-
DogsbolloxofZ1B
- Hardcore
- Posts: 1440
- Joined: 28th Feb 2006
- Location: Near Chichester
Re: Z1000-A2 Fork bush
Thanks for info,
Z1Bman, spot in.
Cheers Mike
Z1Bman, spot in.
Cheers Mike
Who is online
Users browsing this forum: No registered users and 32 guests