Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Fitting a stator to a Z1B

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
User avatar
Zedorset
100Club
100Club
Posts: 217
Joined: 16th Oct 2016
Location: Blandford, Dorset.

Fitting a stator to a Z1B

#1 PostAuthor: Zedorset » Mon Sep 07, 2020 4:08 pm

I want to fit a new stator to my Z1B, do I have to tilt the bike over or drain the oil, or can it be safely changed whilst on the centre stand, any advice would be much appreciated
1975 Kawasaki Z1B
1979 Triumph Bonneville T140D
1969 BSA B25 Starfire
Top
Mr Bump
100Club
100Club
Posts: 382
Joined: 30th Dec 2015

Re: Fitting a stator to a Z1B

#2 PostAuthor: Mr Bump » Mon Sep 07, 2020 7:05 pm

The stator housing is well above the oil level when the bikes on a mainstand, so you'll only loose the little bit of oil that'll be hanging around in the housing.

Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'

Lemmy
Top
User avatar
Zedorset
100Club
100Club
Posts: 217
Joined: 16th Oct 2016
Location: Blandford, Dorset.

Re: Fitting a stator to a Z1B

#3 PostAuthor: Zedorset » Mon Sep 07, 2020 8:28 pm

Thanks Olly :D :
1975 Kawasaki Z1B
1979 Triumph Bonneville T140D
1969 BSA B25 Starfire
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 31 guests