Hi guys
Putting my Zed back together and I have the splitter thingy that mounts on the bottom yoke and carries the front brake light switch and has three holes whrere the brake hoses attach. But because I got the bike in bits I'm not sure about it because I assumed it would just bolt straight on to the yoke but the parts book shows two collars where the M6 bolts go through - it's not clearly shown in the manual either. I don't think I have those spacers - anyone got the dimensions for those (assuming I need them)? What purpose do they serve?
Cheers
TB
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Front brake hose splitter thingy fitting (1000-A1)
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Front brake hose splitter thingy fitting (1000-A1)
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)
Re: Front brake hose splitter thingy fitting (1000-A1)
Hi TB
I've seen those spacers on the parts diagram (CMS.NL) too but I don't remember putting them there...
If the holes in the splitter are not too wide, just forget them.
GrtZ
Philippe
I've seen those spacers on the parts diagram (CMS.NL) too but I don't remember putting them there...
If the holes in the splitter are not too wide, just forget them.
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: Front brake hose splitter thingy fitting (1000-A1)
Thanks Philippe. Yes, to me it looks like it should just bolt straight on with two M6x45 bolts.
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)Who is online
Users browsing this forum: No registered users and 76 guests