Guys,
I have some pitting on the stems of two exhaust valves neat to where the seals would sit.
Question.....give them a light wet & dry to remove any raised bits or just replace?
And if I replace them, should I replace all 8 ? belt and braces etc....
Cheers
Pete
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
valve stem pitting z1b
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Peteypops23
- 100Club
- Posts: 190
- Joined: 12th Jan 2021
- Location: Gretna Green
Re: valve stem pitting z1b
If it's in the seal area I'd replace the offending valves, keep the good one's though.
-
Peteypops23
- 100Club
- Posts: 190
- Joined: 12th Jan 2021
- Location: Gretna Green
Re: valve stem pitting z1b
Thanking you most kindly.Pete
Who is online
Users browsing this forum: No registered users and 62 guests