The Z1000-A1 that I bought in bits came with lots of new spares, including some Hi Level clocks - but they don't fit the original bracket. The bulge on the back of each one fouls the bracket; the fittings etc otherwise line up as they should. Looks like I might be able to file away sections of the bracket but I wondered if anyone knows whether there's a pattern bracket that fits with these clocks?
Also I need to stick new foam on the back of the clocks - how thick should it be? The original stuff is shot to pieces.
Cheers
Theo
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000-A1 pattern clocks fittng
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z1000-A1 pattern clocks fittng
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)
-
- 100Club
- Posts: 185
- Joined: 12th Jan 2021
- Location: Gretna Green
Re: Z1000-A1 pattern clocks fittng
Any photos of the offending articles mate?
Pete
Pete
Re: Z1000-A1 pattern clocks fittng
There's an updated bracket for these. Ring zpower
Re: Z1000-A1 pattern clocks fittng
Taffus wrote:There's an updated bracket for these. Ring zpower
Thanks - I will. I was gonna call Phil this morning but was too busy...
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)
Re: Z1000-A1 pattern clocks fittng
think i may have got mine from cybike, was awhile ago
Re: Z1000-A1 pattern clocks fittng
Thanks all, yes spoke to Phil and they do one and I can see from the photo that it has a bigger space in the centre of each clock bracket. Also appears to come with the foam vibration damping stuff.
https://www.z-power.co.uk/clock-mounting-bracket
Ordered!
https://www.z-power.co.uk/clock-mounting-bracket
Ordered!
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)
Re: Z1000-A1 pattern clocks fittng
Dragging this out of the archives... What are peoples thoughts on these clock sets ??
"Be on good terms with all persons. Speak your truth quietly and clearly, and listen to others; even the dull and ignorant. They, too, have their story."
Re: Z1000-A1 pattern clocks fittng
Andy M wrote:Dragging this out of the archives... What are peoples thoughts on these clock sets ??
They work well at least the ones I have do no wavy needles any more. There was some mods needed to the bulb wiring as I recall and you couldn’t use the original bulb holders and wiring because they were different size.
Re: Z1000-A1 pattern clocks fittng
I have bought a couple of sets this year and they were fine. Everything fitted nicely.
paid up member
Re: Z1000-A1 pattern clocks fittng
chrisNI wrote:There was some mods needed to the bulb wiring as I recall and you couldn’t use the original bulb holders and wiring because they were different size.
Correct!
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Who is online
Users browsing this forum: No registered users and 101 guests