Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Kz1000A gearbox chain sprocket
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
Samanthaz1000
- Regular Poster
- Posts: 45
- Joined: 18th Oct 2021
- Location: Norwich
Kz1000A gearbox chain sprocket
Hi having got a bike in bits , I am really need help with my bike, putting on my new front drive chain sprocket I am finding that the splined shaft does not protrude enough to fit anywhere near the locking washers splines ?¿ So is my sprocket to wide or the output shaft wrong , really fed up took off the selector cover damaged new gasket to look further, why is this bike fighting me compared to the Hodna I have lol
Re: Kz1000A gearbox chain sprocket
Hi,
I suggest its probably worth taking a photo of the shaft protruding from the seal housing and one of the sprocket, plus measuring the thickness of the sprocket and the amount of spline visible then posting the photos and measurements on here.
With some pics to look at I'm sure one of the wise men on here will be able to help.
Don't get too pissed off... projects always fight back. It would be too easy otherwise.
Olly
I suggest its probably worth taking a photo of the shaft protruding from the seal housing and one of the sprocket, plus measuring the thickness of the sprocket and the amount of spline visible then posting the photos and measurements on here.
With some pics to look at I'm sure one of the wise men on here will be able to help.
Don't get too pissed off... projects always fight back. It would be too easy otherwise.
Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Who is online
Users browsing this forum: No registered users and 45 guests