What do these feed?

[Skid Mark]

Hi all!
I tried fire up the Z today... And I'll try again tomorrow!
Very little seems to light-up or work as it should. However, I came across this. It hangs on the right hand side of the battery box. The R/w and White wires join into R/W and connect into positive on the starter relay. The W/Bk fused wire is disconnected, with no likley wire to connect to, the W/Bl wire is missing a fuse. I cannot find these wires or the holder in the wireing diagram, (but it is a pretty blurred copy) Any idea what they are and what correct fuses are? Or can you confirm if they are not standard?
P

[Philippe]

Hi Skid Mark

it seems to be an additional fuse box for accessories.
Those were mounted on the Z1000P bikes. I think they're mounted on the Z1R too but I'm not sure about that (it's been a few years since I restored a Z1R, the years you know...).
I think someone changed the original fuse holder for this one.
A Z1 has only one fuse of 20 Amp.
If anyone has an other idea, please correct me.
GrtZ
Philippe

[Skid Mark]

Thanks Philippe,
I think you're right, I can't quite make out the text but I think they match up to accessory leads.
They aren't the problem!
Thanks.
P