As I'm getting rid of my Z1000J project, I'd better get rid of all the goodies I bought to make up the ELR lookalike.
So here's the very rare JMC bolt on monoshock conversion - never fitted to a road going bike. It was only ever loosely fitted to see how it looked (Well Cool!!).
It comes with a GPZ1100 wheel and a ZZR1100 rear caliper which I haven't had the chance to photograph yet.
Looking for an offer VERY close to £400 and it's collection only as all of my packaging is being used in preparation for a house move.
Please don't make silly offers - I won't respond. If I don't get what I'm after for it, I'll just put it back in the loft.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000J / GPZ1100 /Z1000R JMC Bolt on Monoshock - NOW SOLD
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Z1000J / GPZ1100 /Z1000R JMC Bolt on Monoshock - NOW SOLD
You do not have the required permissions to view the files attached to this post.
Last edited by norsewood on Sat Apr 09, 2022 1:16 pm, edited 1 time in total.
Re: Z1000J / GPZ1100 /Z1000R JMC Bolt on Monoshock - as new
I'm possibly interested, how does that work then? I assume frame mods are required?
Olly
Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Re: Z1000J / GPZ1100 /Z1000R JMC Bolt on Monoshock - as new
Hi Olly,
no frame mods - it utilizes the centre stand mounting brackets for the bottom mount, and the upper mounts(the triangular-ish ones at the top are onto existing frame mounts.
I had it loosely fitted to the J frame but there are a couple of bolts missing for the top mounts and I never got round to getting them.
all the major components are present, just need to utilize the original swing arm bolt.
no frame mods - it utilizes the centre stand mounting brackets for the bottom mount, and the upper mounts(the triangular-ish ones at the top are onto existing frame mounts.
I had it loosely fitted to the J frame but there are a couple of bolts missing for the top mounts and I never got round to getting them.
all the major components are present, just need to utilize the original swing arm bolt.
Re: Z1000J / GPZ1100 /Z1000R JMC Bolt on Monoshock - as new
Hmmm. Where are you?
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Re: Z1000J / GPZ1100 /Z1000R JMC Bolt on Monoshock - as new
I'm in Hempstead in Kent, just off the M2
Re: Z1000J / GPZ1100 /Z1000R JMC Bolt on Monoshock - as new
PM'd you.
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Who is online
Users browsing this forum: No registered users and 4 guests