Hi Guys,
I have managed to buy the missing sprocket carrier for my original set of Z1000A2 wheels, so now I'm looking for a good builder who can refurb my hubs and build me a pair.
my A2 is non-standard , 1100, injected, CMA wheels, Brembo Brakes. So I don't need originality. I think I'd like to go with Flanged / Valanced Alloy rims, probably 3.25">3.5" rear and 2.15" Front so I can squeeze the most tyre on there.
Any suggestions as to a good wheel builder?
Preferably in the south, but not critical
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wire Wheel builders
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
richardwilson45
- Regular Poster
- Posts: 21
- Joined: 4th Mar 2022
- Location: Chichester
Re: Wire Wheel builders
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
-
richardwilson45
- Regular Poster
- Posts: 21
- Joined: 4th Mar 2022
- Location: Chichester
Re: Wire Wheel builders
Hi Adrian,
they only go to 3.00 width for flanged rims, any other suggestions?
they only go to 3.00 width for flanged rims, any other suggestions?
Who is online
Users browsing this forum: No registered users and 62 guests