A set of bandit carbs have been offered to me. Im wondering would they work on my gpz 1100 they are from a 97 N. I'm sure iv seen on here a set from a gsxr 750 will work.
Any information would be appreciated
Paul
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Gpz 1100A1 carbs
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Z1streetfighter71
- ZedHead
- Posts: 1006
- Joined: 16th Oct 2020
- Location: Galway-Eire
Re: Gpz 1100A1 carbs
The carb spacing is the same at 77-93-77 but the lean forward on the bandit 1200s cylinder block is a 10 degrees more than the Gpz so the float bowls will be at an angle, there is a bit of tweaking on the that issue from what i hear, i also read somewhere thats it can be finicky on a cold start but the Japanese lads run Suzuki carbs on Z1000s all the time. Better men on here might know a few more specifics than me.
Angus.
Too many bikes to list.
Too many bikes to list.
-
Kawasakiboy
- new poster
- Posts: 6
- Joined: 13th Feb 2018
- Location: Navan
Re: Gpz 1100A1 carbs
Thank you I wasn't to sure & no point spending money on them if they would be troublesome
Re: Gpz 1100A1 carbs
1000J and Z1100 carbs are the usual swap for the GPZ injection.
-
warren3200gt
- Hardcore
- Posts: 3048
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Gpz 1100A1 carbs
Got a set of thou J carbs knocking about here someplace.
PUM 488 June 2026
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Who is online
Users browsing this forum: No registered users and 106 guests