I bought it several years ago from D&K, it's an A2 but had A1 forks, and it ran terrible so I put it in the shed until I retired, I bought while the prices were still in my range. It's now got A2 forks, a UK seat, and I'm slowly, slowly sorting the electrics out. The reg/rec wasn't connected, some wires were just snipped, others were mutilated and taped together with that horrible tape that leaves a nasty sticky mess behind. The stator was looking ropey, and some of the insulation had worn off the cabling and you could see the metal beneath. On the good side it's got Dyna S ignition but not the coils, I renewed the reg/rec with Z Power one, and got a new fuse box and coloured terminals from them as well. I've stripped, ultrasonically cleaned, and reassembled the carbs, with chokes and air jets from zed1015, so I'm close to firing it up. I'm hoping to get it running enough to use for while, before I strip and rebuild it.Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Hello
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
Doug_Z1000A2
- new poster
- Posts: 1
- Joined: 10th Jul 2024
- Location: Merseyside
Hello
Hi, not much to say, as you may guess from my username I'm Doug, and I have a Z1000A2 I bought it several years ago from D&K, it's an A2 but had A1 forks, and it ran terrible so I put it in the shed until I retired, I bought while the prices were still in my range. It's now got A2 forks, a UK seat, and I'm slowly, slowly sorting the electrics out. The reg/rec wasn't connected, some wires were just snipped, others were mutilated and taped together with that horrible tape that leaves a nasty sticky mess behind. The stator was looking ropey, and some of the insulation had worn off the cabling and you could see the metal beneath. On the good side it's got Dyna S ignition but not the coils, I renewed the reg/rec with Z Power one, and got a new fuse box and coloured terminals from them as well. I've stripped, ultrasonically cleaned, and reassembled the carbs, with chokes and air jets from zed1015, so I'm close to firing it up. I'm hoping to get it running enough to use for while, before I strip and rebuild it.
I bought it several years ago from D&K, it's an A2 but had A1 forks, and it ran terrible so I put it in the shed until I retired, I bought while the prices were still in my range. It's now got A2 forks, a UK seat, and I'm slowly, slowly sorting the electrics out. The reg/rec wasn't connected, some wires were just snipped, others were mutilated and taped together with that horrible tape that leaves a nasty sticky mess behind. The stator was looking ropey, and some of the insulation had worn off the cabling and you could see the metal beneath. On the good side it's got Dyna S ignition but not the coils, I renewed the reg/rec with Z Power one, and got a new fuse box and coloured terminals from them as well. I've stripped, ultrasonically cleaned, and reassembled the carbs, with chokes and air jets from zed1015, so I'm close to firing it up. I'm hoping to get it running enough to use for while, before I strip and rebuild it.- Attachments
-
Re: Hello
Hi Doug
welcome to the club !
Nice bike you have there, congratulations!
I hope that the work you did pays off because these are really good bikes.
Greetings from Belgium.
Philippe
welcome to the club !
Nice bike you have there, congratulations!
I hope that the work you did pays off because these are really good bikes.
Greetings from Belgium.
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: Hello
Welcome.
A good basis you have there for a nice bike. Good luck and ask if you need help!
A good basis you have there for a nice bike. Good luck and ask if you need help!
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
-
newz1owner
- Regular Poster
- Posts: 62
- Joined: 18th Oct 2023
- Location: Nr Chester
Re: Hello
Welcome to the club Doug. 
Who is online
Users browsing this forum: No registered users and 2 guests