Hi All,
I'm just refitting my rear wheel after fitting a new tyre and I've noticed that in two different manuals (Haynes and Kawasaki - Z Series) that the spindle is fitted in opposite directions I.e one has the nut on the left (sprocket) side and one has the nut on the right (brake) side.
Which is right? Or doesn't it matter - my thoughts but you never know!
Cheers,
Ian.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1B Rear wheel spindle direction.
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Z1B Rear wheel spindle direction.
normally on the right side but i've seen it both ways
-
warren3200gt
- Hardcore
- Posts: 3044
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Z1B Rear wheel spindle direction.
Hhhmmmm, which manual to believe, fsm or the the dandy. 
PUM 488 June 2026
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Who is online
Users browsing this forum: No registered users and 55 guests