Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

colour of rear brake push rod and chain adjusters?

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
User avatar
02GF74
100Club
100Club
Posts: 275
Joined: 31st Mar 2008
Location: South Herts

colour of rear brake push rod and chain adjusters?

#1 PostAuthor: 02GF74 » Wed Jul 02, 2008 6:15 am

as in title, what colour were these originally? (A1)

push rod - connects to brake pedal vie a threaded cylinder (what colour was that?) and enters the rear brake cylinder via the tubber cover to push on the piston.

chain adjusteter; similar to these.
Image
Last edited by 02GF74 on Wed Jul 02, 2008 8:18 am, edited 1 time in total.
Top
User avatar
RALPHARAMA
Area Rep.
Area Rep.
Posts: 2752
Joined: 19th May 2007
Location: Pensford, Somerset
Contact:
Contact RALPHARAMA

#2 PostAuthor: RALPHARAMA » Wed Jul 02, 2008 8:14 am

By push rod, do you mean the little fellow with the fork one end that pushed the master cylinder piston and attachs with the fork to the lever at the back of the pedal? If so, it was zinc plated, but I made a new 'un in stainless.

By chain adjusters do you mean the blocks with the threaded hole ? or the bolt with the pointed end ?
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).

http://www.bikerstoolbox.co.uk

Don't be caught out http://www.dhlparcels.info/
Top
Steve Cooke
ZedHead
ZedHead
Posts: 1166
Joined: 18th Mar 2007
Location: Southampton

#3 PostAuthor: Steve Cooke » Wed Jul 02, 2008 4:58 pm

All bright zinc plate.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: Google [Bot] and 40 guests