ChrisNI's Z1000 rebuild

mick znone · #46 PostAuthor: **mick znone** » Fri May 01, 2009 9:06 pm

think he started this project before you owned your bike ash :lol:

you sure you didnt nick any idea's off chrisNI :shock:

ash · #47 PostAuthor: **ash** » Fri May 01, 2009 9:12 pm

Think chris nicked my ideas as mine was sorted in less than 7 months start to finish,

mick znone · #48 PostAuthor: **mick znone** » Fri May 01, 2009 9:18 pm

this has been going on so long iT has to be called the New York steak

ash · #49 PostAuthor: **ash** » Sat May 02, 2009 8:51 pm

Ahhhhhhhhhhhhh i remember Chris saying years ago i goto get this done, lol :oops:

#50 PostAuthor: **chrisNI** » Sat May 02, 2009 11:26 pm

ash wrote:Looks like some of the same as what was on my bike:D

As you probably know Ash the rearsets are actually off your bike - apart from that no..... :toothy

ash · #51 PostAuthor: **ash** » Sun May 03, 2009 7:27 am

Chris dont be shy now, lol :roll:

#52 PostAuthor: **chrisNI** » Mon Jun 22, 2009 12:18 am

Yokes!

: DSC00156.JPG (100.42 KiB) Viewed 3971 times

phil churchett · #53 PostAuthor: **phil churchett** » Mon Jun 22, 2009 8:19 am

Chris, congratulations! you win the award for "longest running thread". [2 and a half years].

PJ · #54 PostAuthor: PJ » Mon Jun 22, 2009 10:00 am

chrisNI wrote:Yokes!

Chris, luv the look of the front wheel, what make is it, what costs involved to get it done, who did it?

Also what's the back like?

Good luck with the rest of the build

PJ

#55 PostAuthor: **chrisNI** » Mon Jun 22, 2009 8:35 pm

PJ more about the wheels nearer the start of the thread. Still a bit of work to do at the front more information (and pictures not taken on a phone perhaps) when we get it completely bolted together.

brian 450 · #56 PostAuthor: **brian 450** » Fri Jun 26, 2009 8:33 am

phil churchett wrote:Chris, congratulations! you win the award for "longest running thread". [2 and a half years].

I will be up for entering for that award

#57 PostAuthor: **chrisNI** » Tue Jul 07, 2009 5:07 pm

Just to prove this hasn't stalled completely here are a few more pics.

Talking about the length of the thread it's not that long - I dug out the paperwork for the wheels earlier just out of interest - I bought those in May '01.... doesn't time just fly past when you're trying to pull things together, on that scale this is flying along now. I haven't documented any of the blind alleys we've been down, that could fill a book.

: z2338.jpg (188.93 KiB) Viewed 3970 times

: z2339.jpg (156.99 KiB) Viewed 3970 times

: z2342.jpg (158.3 KiB) Viewed 3970 times

A certain amount of dry building going on here - in the next fortnight I hope to get the spacers made for the front end, get the wheel in properly then get disc offset measured using these discs which I pulled off the 1000R last night and once that's all sorted I can get a proper set for this. Then it will be a roller...

: z2341.jpg (114.58 KiB) Viewed 3970 times

: z2340.jpg (167.81 KiB) Viewed 3970 times

Got a plan for the headlight brackets and the back hub needs machined to move the rear sprocket in, I finally get the offset engine sprocket fron Debben's today so that can now move forward too. Then it's odds and ends of fabrication left, some bits need modified others need changing but we're really going to be done for November's Z1 OC stand at the NI Classic Bike Show.... :ek

famous last words.

Luckily most of the money's already been spent as things are really tightening up out here! If I was doing it now I wouldn't be.

Pigford · #58 PostAuthor: **Pigford** » Tue Jul 07, 2009 6:20 pm

Thats gonna be a real cracker :twisted:

mikey · #59 PostAuthor: **mikey** » Tue Jul 07, 2009 7:01 pm

Don't you just love them wheels :rocks

#60 PostAuthor: **Ginger Bear** » Wed Jul 08, 2009 8:03 pm

Looks like it's gonna be worth the wait Chris,
I've always maintained that 'you can't rush quality' :lol:

ChrisNI's Z1000 rebuild

Who is online