Bike Ramp

baz · #1 PostAuthor: **baz** » Thu Jul 16, 2009 4:12 pm

Hi, Please could someone advise me on the best type of hydraulic bike ramp for a Z900.

Cheers Ian

Padders · #2 PostAuthor: **Padders** » Thu Jul 16, 2009 8:43 pm

Mick (foreeverinthegarage) is making me one at the moment after I saw one he made for his friend with a Harley. (i.e. very strong to take the weight) I will post a picture when its complete. He is looking at making a few and offering them on here at a discount. Nice long wooden table.

baz · #3 PostAuthor: **baz** » Thu Jul 16, 2009 9:13 pm

thanks for that i will hang on for a while before buying one. the ones i looked at were crap anyway.

Keefleaf · #4 PostAuthor: **Keefleaf** » Thu Jul 16, 2009 9:42 pm

I`ve just done a swop for a "Homebrew"workbench but it seems too tall.
What would you suggest as a good workable height?Anglegrinder at the ready

london calling · #5 PostAuthor: **london calling** » Fri Jul 17, 2009 4:28 am

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0139758854

Gremlin is a top bloke :wink:

bollypne · #6 PostAuthor: **bollypne** » Fri Jul 17, 2009 10:56 am

london calling wrote:http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380139758854

Gremlin is a top bloke

I have one very similar to this, only thing i would change is the way it lifts. I would prefer scissor type as this goes straight up and down rather than this design. Either way i would not be without one, i'm contstantly working on one bike or another so saves back ache etc. Always have one bike up on the stand to save space. Money well worth spent.

RGH · #7 PostAuthor: **RGH** » Fri Jul 17, 2009 12:44 pm

london calling wrote:http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=380139758854

Gremlin is a top bloke

I've simular one as well Baz- can wheel out with bike on, fold up, tip on side for storage or more floor space best thing ever bought (EXCEPT MY Z1B) Hench

baz · #8 PostAuthor: **baz** » Fri Jul 17, 2009 5:26 pm

cheers lads its one of those things you need to get right the first time or its back on ebay the following week. more homework reqd. i think

#9 PostAuthor: **chrisu** » Sun Jul 19, 2009 1:48 pm

I've got a Sealey bike lift - works well and very stable. Also has a panel at the back to make rear wheel removal easier.

#10 PostAuthor: **Ginger Bear** » Mon Jul 20, 2009 9:41 pm

I have a Sealey bike lift. I wouldn't be without one.

Mine is designed to be used with a centerstand :oops:

I have managed to bolt a piece of bent (U section) stainless chequer plate to support the rear wheel, (not shown in this pic). If I were buying another one, I would buy a full length version, although the short bench does save a lot of space.

GUYZED · #11 PostAuthor: **GUYZED** » Mon Jul 20, 2009 10:30 pm

[quote="chrisu"]I've got a Sealey bike lift - works well and very stable. Also has a panel at the back to make rear wheel removal easier.

I've got one of them, excellent bit of kit.
My mum bought it for me for Cristmas/Birthday present

Blue900Z1B · #12 PostAuthor: **Blue900Z1B** » Mon Jul 20, 2009 10:35 pm

This is the one I've got that my Z1B is currently on.

http://cgi.ebay.co.uk/800lbs-MOTORCYCLE ... 7C294%3A50

bollypne · #13 PostAuthor: **bollypne** » Tue Jul 21, 2009 7:29 am

I'm sure this is where i got my bench, actually bought 2 for about Â£430. One for a pal. Had for about 4 years, excellent value.

#14 PostAuthor: **chrisu** » Tue Jul 21, 2009 4:56 pm

GUYZED wrote:
chrisu wrote:I've got a Sealey bike lift - works well and very stable. Also has a panel at the back to make rear wheel removal easier.

I've got one of them, excellent bit of kit.
My mum bought it for me for Cristmas/Birthday present

aren't mums wonderful.........

tlc · #15 PostAuthor: **tlc** » Tue Jul 21, 2009 5:02 pm

So Chris, the Seeley is the one to go for then ?

Bike Ramp

Bike Ramp

Who is online