Cleaning the carbs on my 1978 KZ1000 A2 I have found one of the starter plungers is bent. Anyone got a straight one I can buy please?
Starter plunger is number 51 in the picture
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
KZ1000 starter plunger
Moderators: KeithZ1R, chrisu, paul doran, Taffus
KZ1000 starter plunger
- Attachments
-
- Starter plunger (51).jpg (18.45 KiB) Viewed 1730 times
Dear Santa, please can I have...
Re: KZ1000 starter plunger
I refurb these all the time and fit new Viton seats as the originals are always worn and leaking which causes rich running..
viewtopic.php?f=1&t=46284&p=383839#p383839
Many are bent when I receive them but they are only brass and easily straightened.
I also have a very limited amount of NOS Mikuni plungers here -
viewtopic.php?f=1&t=46415&p=384946#p384946
viewtopic.php?f=1&t=46284&p=383839#p383839
Many are bent when I receive them but they are only brass and easily straightened.
I also have a very limited amount of NOS Mikuni plungers here -
viewtopic.php?f=1&t=46415&p=384946#p384946
Re: KZ1000 starter plunger
There you go, Robs ya man. 
Kawasaki Z1-R TC Turbo, Kawasak GPz750 Turbo, Kawasaki KZ650B3, Kawasaki ZRX1100R, H**** VF500F2F, Norton Commando 961SP, Suzuki VS800
Who is online
Users browsing this forum: No registered users and 52 guests