Hi all ,
I'm looking to fit some non pumped z1000 carbs to my z650
Is it worth doing? A straight forward job and any ideas on jetting
If fitted...
Cheers Dave
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z650 (z1000 carbs)
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Z650 (z1000 carbs)
It's a common mod and will wake up the motor a bit.
You need to use the 900/1000 inlet rubbers too and slot the mounting holes slightly to get them to fit as the holes are fractionally wider apart than the 650.
Start with the stock 1000 jetting and work down on the mains.
You need to use the 900/1000 inlet rubbers too and slot the mounting holes slightly to get them to fit as the holes are fractionally wider apart than the 650.
Start with the stock 1000 jetting and work down on the mains.
Re: Z650 (z1000 carbs)
Sure Padders has a set for sale
Who is online
Users browsing this forum: No registered users and 24 guests