hello, im looking at building another special.....do any of you fine knowledgeable lot know if it is possible to fit z1 bodywork to a z650 frame.
im looking at reproduction tank/ panels etc, but dont want to pull the pin if they wont fit.
thank you in advance
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
z650 frame, z1 bodykit
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: z650 frame, z1 bodykit
They are not a direct fit and will need suitable mounts etc welding on the frame but anything will fit anything if you know how.
Re: z650 frame, z1 bodykit
yes i realise that anything can be made to fit, but was looking for an easy option. thanks for replying.
Re: z650 frame, z1 bodykit
The tank is quite straightforward to fit, I put one on a z750 (this has the same frame shape around the headstock and engine) and all that was needed is to weld a piece of bar across the frame for the tank support rubbers.
straightening the curves and flattening the hills
Re: z650 frame, z1 bodykit
ok, cool, thanks, doesnt sound like too much of an issue then.
Who is online
Users browsing this forum: No registered users and 47 guests