under bucket conversion for a z1000J

[floydsz1]

I need to convert the head on my 1000j race bike project to the later gpz underbucket shims/retainers/buckets if anyone has a set for sale/swop. Not sure exactly what i need but i'm sure someone on here will know. if not its going to have to be new from phil/dave at zpower.

[Crofty]

Pete, I am not 100% sure, but you may need to use 650 buckets if you don't buy APE or MTC stuff.
If you want to try 2nd hand stuff, i am sure I have 8 x 650 buckets, not sure what you use on top of the valve springs though, if you need 650 valve spring caps I can let you have 8 of those too.
Check it all out first and pm me when you know the exact deal.
Jim

[floydsz1]

cheers jim I'll check whats needed etc and get back to you.

[ADRIAN H]

Talk to Ray Debben, Debben Performance.

[z1bman]

hi all you need to replace is the buckets + valve spring retaining caps from any of the z650 + z750 range

[zed1015]

All you need is the buckets and retainers off a z650/750 or later gpz11.

[floydsz1]

cheers guys,

[Crofty]

Pete, pm me your address and i will pop 8 caps and 8 buckets to you, Jim
ps caps will be fine, buckets may have some staining etc, but should do, you will need to try them in the holes