does anybody know if the a4 caliper shaft bolts are still available.
Mine are scruffy but could possibly be rechromed if new are not available.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
a4 caliper shaft bolts
Moderators: chrisu, paul doran, Taffus, KeithZ1R
a4 caliper shaft bolts
Last edited by swampy on Sat Aug 05, 2017 8:40 pm, edited 1 time in total.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: a4 caliper shaft bolts
no longer available
Re: a4 caliper shaft bolts
bugger. does anyone produce re'manufactured ones then in stainless or chrome.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: a4 caliper shaft bolts
found these but they are taking the piss if this is for one bolt
http://www.zed-parts.com/_p/prd1/426422 ... liper-bolt
http://www.zed-parts.com/_p/prd1/426422 ... liper-bolt
Re: a4 caliper shaft bolts
ffs they can shove that price where the sun dont shine £35 for one bolt.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: a4 caliper shaft bolts
Are you sure they weren't black originally?
My old Thou A1 (same caliper)...
My old Thou A1 (same caliper)...
- Attachments
-
- 1768d188-d997-4cda-be2f-4f8623a8504b_zpsfb7sveoj.jpg (346.47 KiB) Viewed 6991 times
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Re: a4 caliper shaft bolts
Agree with Gary, ones i have done have been black anodised type finish...
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Re: a4 caliper shaft bolts
no I'm not sure, as they where/are badly painted black and have some surface rust.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: a4 caliper shaft bolts
Don't know what the coating/plating was originally on these bolts, but it was a sort of drab/olive green finish.
The stainless steel ones in the link above look like they're machined to accept O-rings, which is a bit strange as the carriers have O-rings fitted.
£35 is very steep for one bolt though, I'm sure you should be able to have some made yourself for less than that !
The stainless steel ones in the link above look like they're machined to accept O-rings, which is a bit strange as the carriers have O-rings fitted.
£35 is very steep for one bolt though, I'm sure you should be able to have some made yourself for less than that !
Re: a4 caliper shaft bolts
swampy wrote:no I'm not sure, as they where/are badly painted black and have some surface rust.
The bolts on my old A4 were a bit shitty so when I rebuit the caliper I just polished the heads on the buffer which come up not far off chrome...
- Attachments
-
- Z1043.jpg (136.78 KiB) Viewed 6961 times
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Re: a4 caliper shaft bolts
mine are deffo not stainless steel. hence the surface rust.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: a4 caliper shaft bolts
the original bolts are black & not stainless steel
Re: a4 caliper shaft bolts
The caliper bolts are Olive Drab on both my z1000s.
Re: a4 caliper shaft bolts
ok. clean up and refinish it is then, thanks chaps.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: a4 caliper shaft bolts
I have restored a few A4 calipers and the original finish on these bolts was olive drab ( same as the original finish on your carb clamps)
There are plating companies that will do this finish for you but I asked the platers I use for zinc plating all my nuts and bolts and they said they could achieve a black finish by zinc plating then black passivation. This produced a very durable black finish virtually indistinguishable from the original and cheap as chips!
Worth a try.
There are plating companies that will do this finish for you but I asked the platers I use for zinc plating all my nuts and bolts and they said they could achieve a black finish by zinc plating then black passivation. This produced a very durable black finish virtually indistinguishable from the original and cheap as chips!
Worth a try.
Who is online
Users browsing this forum: No registered users and 36 guests